How To Program Vivitar Universal Remote: A Complete Guide (2024)

Hello, and welcome to this guide on how to program Vivitar Universal Remote. The goal of this post is to help you do just that – learn the basics of programming remote control.

With a little patience and the right instructions, you can Program your Vivitar Universal Remote all by yourself! In this complete guide, we’ll show you how to program your Vivitar Universal Remote step-by-step so that you can get back to watching TV in no time.

How To Program Vivitar Universal Remote?

If you have recently purchased a Vivitar Universal Remote, you may be wondering how to program it. This guide will walk you through the steps necessary to program your remote.

A Vivitar Universal Remote is a device that can be used to control various devices in your home, such as your TV, Blu-ray player, and sound system. It’s a great way to consolidate all of your remote controls into one, easy-to-use device

But in order to use the Vivitar Universal Remote, you will need to program it with the codes for your specific devices. These codes can be found on this page. After getting codes, the process is actually quite simple and only takes a few minutes. Here’s what you’ll need to do:

Steps To Program Vivitar Universal Remote

Once you have located the codes for your devices, follow these steps to program your remote:

1. Turn on the device that you wish to control with the remote.
2. Press and hold the ‘Setup‘ button on the remote until the red light on the remote begins to blink.
3. Enter the code for your device using the numbered buttons on the remote.
4. Press and release the ‘Power‘ button on the remote. The red light should now remain lit steady indicating that your device is programmed into memory.

Other Methods To Program Vivitar Universal Remote

There are a few different ways that you can use to Program Vivitar Universal Remote, other than using codes. You can use the Auto Search Function, or the Manual Code Search Function.

The Manual Method:
This function allows you to manually search for a compatible code for your device by entering in specific codes. To use this function, turn on your device and

The Code Search Method:
This function allows you to automatically search for a compatible code for your device. To use this function, simply turn on your device and point the remote at it. Then, press and hold down the “search” button until the LED light on the remote blinks twice. The remote will then automatically scan for a compatible code and save it if it finds one.

How To Program Vivitar Universal Remote With Manual Method

If you want to program your Vivitar universal remote without using the automatic code search method, you can try the manual method. Here’s how:

1. Start by turning on the device that you want to control with your remote.
2. Press and hold the “Setup” button on your Vivitar universal remote until the red light indicator turns on.
3. Enter the code for your device into the remote using the number buttons.
4. Once you’ve entered the code, press and release the “Power” button. The red light indicator should blink twice if you’ve entered a valid code.
5. Test the buttons on your remote to see if they now control your device.

How To Program Vivitar Universal Remote Without Codes

If you don’t want to use codes and want to Program Vivitar Universal Remote without codes, then you have followed some other steps.

1. First, you need to find the “Code Search” button on your remote control. It is usually located at the top of the remote control. Once you have found it, press and hold down the code search button for about three seconds.
2. After that, you need to point the remote control at the TV and press the “Power Button“. The TV should turn off. If it doesn’t, then you need to try another code.
3. Repeat this process until you Find a code that turns off your TV. Once you have found it, press and hold down the code search button for about three seconds. Then, enter the code into the remote control by using the number buttons.
4. Finally, press the “Power Button” and your TV should turn on.

What Are the Different Modes of a Universal Remote?

There are three different modes that a Vivitar universal remote can be set to TV, DVD, and VCR. To change the mode, press and hold the “Mode” button on the remote until the light corresponding to the desired mode lights up. Then, use the remote as you would any other remote for that device.

TV mode is used to control televisions. In this mode, the volume buttons will adjust the television’s volume, the power button will turn the television on or off, and the channel buttons will change the channel that the television is tuned to.

DVD mode is used to control DVD players (or Blu-ray players, if your remote is programmed for that). In DVD mode, the play/pause button will start or stop the playback of a disc, while the fast forward/rewind buttons can be used to navigate through a disc.

VCR mode is used to control VCRs (or DVRs). In this mode, pressing play will start the playback of a cassette tape, while pressing pause will stop playback (or recording). The fast forward/rewind buttons can also be used in this mode to navigate through a cassette tape. Pressing them both at once will eject the cassette from the player.

How to Troubleshoot a Vivitar Universal Remote

If your Vivitar universal remote is not working properly, there are a few things you can do to troubleshoot the issue. First, check the batteries to make sure they are fresh and inserted correctly. If the batteries are fine, then try resetting the remote by pressing and holding the “Reset” button for three seconds.

If that doesn’t work, try reprogramming the remote using the instructions in the user manual. If you still can’t get the remote to work, contact Vivitar customer service for assistance.

Conclusion

In conclusion, programming Vivitar universal remote is a simple process that only requires a few steps. By following the instructions in this guide, you’ll be able to program your remote in no time and start using it to control all of your compatible devices. So what are you waiting for? Get started today and see just how convenient and easy it is to use a Vivitar universal remote.