Best Vivitar Universal Remote Codes & Manual Guide (2024)

Vivitar is a famous brand that produces 8 in 1 universal remote controls. This remote allows you to control many devices together. To do this, you must connect your devices to the Vivitar universal remote. To do this, you need the Vivitar Universal Remote Codes.

In the following guide, you will get all the Vivitar remote codes needed to connect devices with the Vivitar remote. Also, you will find detailed instructions on the remote programming of the Vivitar Universal.
Before checking the steps to program the Vivitar Universal Remote, please refer to the Vivitar Universal Remote Code List.

These are three, four, or five-digit remote codes to program the Vivitar Universal Remote for devices like TV, DVDs, VCRs, etc.

Vivitar Universal Remote Setup Code

4- Digit Vivitar Universal Remote Code

Here is the complete list of Vivitar universal remote codes in the table below

CL3 & CL4 Vivitar Universal Remote Codes

The CL3 and CL4 Vivitar universal remote codes are in the below table. You can pick one correct code from that table and enter it to program a universal remote.

Vivitar Remote Setup Code Dynex TV

If you’re searching for remote codes for Dynex TV then you’re in the right place. The complete list of Vivitar universal remote codes for Dynex Tv is available below.

Vivitar Remote Codes for Vizio TV

Do you need Vivitar universal remote codes for Vizio Tv? If yes, then go through with the below. The table there is the latest list of remote codes for Vizio tv.

Vivitar Remote Codes for Sony TV

If you want to know about the Vivitar universal remote codes for Sony Tv then check out the section below. There are so many remote codes available for you. Select the correct code and enter in the programming

Vivitar Remote Code ->Samsung TV

If you want remote codes for Samsung TVs, please refer to the table below. Vivitar universal remote codes for Samsung TVs are listed below.

Vivitar Remote Code ->LG TV

If you’re in search of Vivitar universal remote codes for LG tv then follow the table given below. Select one code and use it applying the manual method.

Vivitar Setup Remote for Philips TV

The Vivitar universal remote codes for Philips tv are available in the below table. From the table, pick one correct code and enter it. If that code doesn’t work then pick another code and try until you get the correct code.

Vivitar Remote Code for Emerson TV

Vivitar setup Code for Sanyo TV

The below table is a complete and the latest list of Vivitar universal remote codes for Sanyo tv. select one correct code to program by using the manual method.

Vivitar Setup Remote Code->Insignia TV

The Vivitar universal remote codes for Insignia tv are mentioned below. The table is a complete list of remote codes for your Insignia Tv where you can find out the correct code to program.

Vivitar ProgramCode for Element TV

The Vivitar universal remote codes for Element Tv are available, select one correct code to program a universal remote to the device.

Vivitar Universal Remote setup Codes

How did I Program Universal TV Remote Without Instructions?

Let’s see how I program my universal tv remote when I need an instruction booklet. So, I found that the universal remote can search for the code that works by itself.

If you want to program your remote using this process, you must be patient because it takes extra time compared with the manual method.

Now, let’s follow the process.

Firstlyswitch ON the “power” button that you want to program with the universal remote it can be a TV or DVD

Step -2Press and hold the LED button on your remote and hold it till your button lights up.

Step -3Next, press the TV or DVD button that you want to program with the remote. Then the LED light will blink, and the light remains on.

Step – 4Point your remote to the device and click on the POWER button on the remote. Hold the button till the device turns off.

Step -5Lastly, press the enter key on the remote. The LED light also turns off. Now your remote is programmed correctly to use with your device.

How to Setup Vivitar Remote Manually

Step 1.Turn on the device you want to use with Universal Remote.

Step 2.Suppose you want to program a TV; press the “TV” button on the Vivitar remote.

Step 3.Now, press and hold the “Setup” button on Vivitar universal remote unless it gives a flash indicating that the remote is now in the “Learning Mode.”

Step 4.After that, choose the required code from the Vivitar universal remote codes mentioned above.

Step 5.Once you have entered the code, aim the Vivitar universal remote toward the TV and press the “Power” button.

Step 6.Hold the power button and release it as soon as the device turns off.

Note:If the device turns off, the Programming has been done successfully. If not, you can pick another code from the list of Vivitar remote codes. After that, follow the exact Vivitaruniversal remoteprogramming instructions.

How to set up Vivitar Remote with Auto-Search Method?

Step 1.Firstly, switch on that device to connect Vivitar universal remote to the TV or any other device.

Step 2.Also, turn on the Vivitar remote and press the component button (TV, CBL, DVD, OR OK/SEL) for the device you want to program. An LED light will blink, showing that now the device is ready to be programmed.

Step 3.Aim the remote in front of your device, like the TV, and press the “CH+” or “Ch-“buttons. The Vivitar universal remote will give On/Off signals. Now, press the Up/Down keys repeatedly till the device turns off. Step 3. Aim the remote in front of your device, like the TV, and press the “CH+” or “Ch-“buttons. The Vivitar universal remote will give On/Off signals. Now, press the Up/Down keys repeatedly till the device turns off.

Step 4.To verify the code, press the “Power” button on Vivitar universal remote. If the device turns on and responds, the Vivitar universal remote setup is done correctly.

Step 5.Finally, press the Component button on the Vivitar remote to save the code. The LED light indicator will blink twice to confirm the code.

How to Connect Vivitar Universal Remote with Code-Search Method?

You can use this method if you need help finding the appropriate code to program your device with Vivitar universal remote. It is the code search method that forces one code into search mode.

Step 1.First, turn on the device to connect with Vivitar universal remote control.

Step 2.Press the “Setup” button on the remote after the device has started up.

Step 3. Enter the code “9-1-1” into the Vivitar remote’s number pad.

Step 4.Keep pressing the”Power” button on the remote for a second Then press the “Ch+” button unless the device gets switched off.

What Are The Features of Vivitar Universal Remote Control?

1. Vivitar Universal remote control is an eight-device remote that can easily control up to eight devices.

2. This Vivitar remote can operate with all brands of devices like TV, DVD, Blu-Ray, Cable, Satellite, Home Theatre, and much more.

3. Vivitar universal remote operates on batteries powered by two AAA batteries.

4. The design of the Vivitar universal remote is Ergonomic, which means eco-friendly.