The Ultimate Guide To Leg Press Foot Placement (2024)

What's inside

The leg press is an absolute staple exercise in many leg day workouts.

The leg press machine is a safer alternative to free-weight exercises like the barbell squat.

That being said, the leg press still requires some know-how for those new to using it.

If you’ve seen your fellow gym-goers using a leg press machine, you may have noticed that different people use different techniques.

One of the most noticeable differences between lifters on the machine is in their foot placement for leg press exercises.

That’s what this article is all about.

In this ultimate guide to leg press foot placement, we’ll discuss why foot placement is important and how it affects your training.

We’ll cover different leg press stances, machines, foot placements, and how to do each for a different spin on your leg session.

There are also some great tips for using the leg press machine to get the most out of it, no matter your goals in the gym.

Where do you place your feet on a leg press?

Related: How To Get Rid Of Chicken Legs

The Ultimate Guide To Leg Press Foot Placement (1)

The best place to position your feet on a leg press machine plate depends on your build, health status, and training goals.

Different foot positions emphasize different areas of your leg muscles, as well as on the ankle, knee, and hip joints.

In this article, we’ll outline the major muscles the leg press targets and how different foot positions can work certain muscles more.

You’ll also learn which foot placement is best for different injuries or areas of lower limb pain.

What does leg press foot placement mean?

Related: Why Are My Legs So Skinny

Leg press machines involve sitting or lying in a supported position and placing your feet on a foot plate.

This is usually in the form of a large, rectangular metal plate with an embossed surface for added grip.

These plates are quite large, allowing you to place your feet in a range of different positions across them.

The positioning of your feet on the plate can make a big difference in the effects the exercise has on your muscles and joints.

Different foot placement can make the same weights seem easier, heavier, or even painful in cases where it is not optimal for an individual.

Let’s break down the muscle groups we are trying to target when working on a leg press machine.

Which muscles are worked in the leg press?

Related: 5 Day Dumbbell Workout Split For Muscle Building

The Ultimate Guide To Leg Press Foot Placement (2)

The leg press is a compound, multi-joint lower body exercise.

It recruits many major muscle groups in the thighs, lower legs, and trunk.

The movements performed in the leg press are flexion and extension in the ankle, knee, and hip joints.

The leg press is considered a closed chain exercise as the feet are planted on the plate while moving the weight.

The major muscles involved in the leg press include:

  • Quadriceps: Rectus femoris, vastus lateralis, vastus medialis, vastus intermedius
  • Hamstrings: Biceps femoris, semitendinosus, semimembranosus
  • Glutes: Gluteus maximus, medius, minimus
  • Adductors: Magnus, brevis, longus
  • Calves: Gastrocnemius, soleus
  • Core: Transverse abdominis, pelvic floor, diaphragm, quadratus lumborum

Many other muscles in the upper and lower leg, as well as the trunk, feet, and upper body are used to stabilize and support the body in the leg press.

For the purposes of foot placement, we will mainly be focused on the quads, hamstrings, glutes, and to a lesser extent, the calves.

The superficial three heads of the quads are worth noting here – the inner ‘tear drop’ head (vastus medialis), outer head (lateralis), and the central rectus femoris.

These muscles that collectively form the quadriceps have different activation levels as we change foot positions on the leg press plate.

There are also specific placements to focus more on the hamstrings and glutes.

Next, let’s distinguish between the different makes of leg press machines as these can also affect foot placement.

Leg Press Machine Types

Plate Loaded Machine

The Ultimate Guide To Leg Press Foot Placement (3)

One of the commonly seen leg press machines in commercial gyms is the 45-degree leg press machine.

These heavy-duty machines are loaded up with weight plates on either side.

This machine is named after the angle of the rail which guides the foot plate.

On this machine, you sit in an inclined seat in a low position and press the plate up at a 45-degree angle.

The seat can be adjusted at different angles. Research also shows differences in muscle activation when this is changed.

Pin-Loaded Machine – Horizontal

The Ultimate Guide To Leg Press Foot Placement (4)

The lying or horizontal leg press can also be found in many gyms and is more popular in hotel and boutique gyms.

These machines are pin-loaded, meaning the weight is set and controlled by a pulley system.

In this variation of the machine, instead of sitting, the user lays back and has shoulder pads to push against.

These machines are unique in that the backrest, rather than the foot plate, is what moves back and forth.

Because you are lying back more, these machines also allow for a greater range of hip extension.

One drawback of the lying leg press is that it sometimes doesn’t suit tall people, as the tracks can be limited in length.

Pin-Loaded Machine – Seated

The Ultimate Guide To Leg Press Foot Placement (5)

This is similar to the pin-loaded machine above. However, this one is in an upright seated position.

It’s probably more similar in feel to the 45-degree leg press, although it can feel more comfortable for some users.

Whatever type of leg press you have access to, it’s important that we go over the correct technique of the exercises.

After we cover the basics, we’ll explain in further detail the steps for different foot placements, including seated leg press foot placement.

How to Use the Leg Press Machine

alt/image: leg press machine

The following are the general steps to go through when performing a leg press.

The video example above demonstrates a 45-degree leg press machine, which has an additional safety mechanism.

Here is how to perform the leg press exercise:

  • Sit in the seat of the machine with your back on the backrest.
  • Place your feet flat on the plate.
  • On a 45-degree machine, push the platform away slightly and turn the safety handles away.
  • Hold the handles provided.
  • Start from a straight (but not locked out) leg position.
  • Inhale and slowly lower the plate toward you until the hips and knees are at about 90 degrees.
  • Exhale and drive through the heels to push the legs back to the starting position.
  • Be sure to turn back the safety handles to set the plate before taking the feet off.

In a seated leg press machine, you’ll often begin from the bottom position, so just reverse the steps of straightening and bending the legs.

Now, let’s dive into the details of where to place your feet on the leg press machine.

The Three Directions of Leg Press

Height

The first variable in leg press foot placement is the vertical positioning.

You can place your feet at the top of the plate, closer to the bottom, or anywhere in between.

This has a big impact on the angles and forces during ankle, knee, and hip flexion and extension.

It can also affect your lower back if you lack sufficient flexibility in the leg muscles.

Width

The next way you can alter foot placement is the width of your stance.

This element shares common ground with the classic barbell squat as stance width is something that can also be modified in that exercise.

The feet can be placed in a narrow, shoulder-width, or wide stance on the plate.

This changes the angle of the knee relative to the hips in the frontal plane of movement.

Width also affects the degree of knee flexion you can achieve in the leg press.

Angle

Finally, we have the foot angle which can be changed during leg press foot placement.

The toes can be aligned straight up on the plate or rotated out to varying degrees.

This changes rotation in the hips and causes muscles to work slightly differently throughout the movement.

Foot angle often goes hand-in-hand with stance width, with some people using a turned-out angle with narrow or wide stance leg press exercises.

While some research suggests minimal effect of forefoot angle on muscle activation in the leg press, it is definitely relevant to comfort and technique for different individuals.

With these three elements in mind, let’s go through several of the most common foot placement styles you can try with your leg press.

Leg Press Variations: The Most Common Foot Placements

The following are some of the common types of leg press foot placement you’ll see in the gym.

For each, we describe how to place the feet before you follow the general leg press technique steps outlined above.

Also, check out the pros and cons as we suggest who each foot placement variation might be the most suitable for.

Regular Leg Press Foot Placement

The Ultimate Guide To Leg Press Foot Placement (6)

alt/image: regular leg press foot placement

  • Mechanism: Place the feet hip to shoulder-width apart, in the center of the plate.
  • Muscles emphasized: General quads, glutes, hamstrings, calves.
  • Pros & cons: Good starting point, hits everything, but better moves to target certain heads.

Wide Stance Leg Press Foot Placement

The Ultimate Guide To Leg Press Foot Placement (7)
  • Mechanism: Place the feet 1.5x shoulder-width or wider with toes very slightly turned out.
  • Muscles emphasized: Adductors, glutes, hamstrings.
  • Pros & cons: Good stretch for inner thigh muscles, but requires good posterior flexibility.

Narrow Stance Leg Press Foot Placement

The Ultimate Guide To Leg Press Foot Placement (8)
  • Mechanism: Place the feet slightly narrower than hip-width apart; toes turned out 45 degrees optional.
  • Muscles emphasized: Vastus lateralis (outer head of quads), calves.
  • Pros & cons: Great quad-dominant variation, heavy on the knee extension angle and requires high ankle mobility.

High Leg Press Foot Placement

The Ultimate Guide To Leg Press Foot Placement (9)
  • Mechanism: Place the feet hip to shoulder-width apart, higher towards the top of the plate.
  • Muscles emphasized: Glutes, hamstrings.
  • Pros & cons: Easier on the knees, excellent glute engagement, but lesser quad activation.

Low Leg Press Foot Placement

The Ultimate Guide To Leg Press Foot Placement (10)
  • Mechanism: Place the feet hip to shoulder-width apart, low toward the bottom of the plate. Keep the entire foot on the plate and ensure the heels contact the plate at all times.
  • Muscles emphasized: Quadriceps (especially VMO if toes turned out), calves.
  • Pros & cons: Intense quad exercise with increased knee flexion angle; however, it might aggravate those with sore knees.

Check out this video for a good summary of the standard, high, and wide foot stance variations:

And here’s another no-nonsense video on the narrow, standard, and wide (with toes turned out) foot placements:

Other Leg Press Foot Placements

  • Single leg press: Place one foot on the plate in line with the same-side knee and hip.
  • Externally rotated feet: Mentioned above, this can be done based on personal preference or slightly emphasizing the VMO portion of the quads.
  • Leg press calf raises: This exercise can be done on the leg press machine and involves placing the balls of the feet on the bottom of the plate with the heels off.

Leg Press Benefits and Pro Tips

Leg Press Benefits

  1. It’s safer on the spine as the back is supported.
  2. You can lift heavier weights than free weight leg exercises.
  3. It’s an entire compound leg builder.
  4. The machines are widely available – most gyms have more than one.
  5. Wide variation of stances allows entire leg workout on one machine.
  6. It’s easy to adjust and progress weight.
  7. It has a lower skill ceiling than barbell squats.
  8. The machines have built-in safety mechanisms to avoid dropping weight.

Leg Press Pro Tips

  1. Try barefoot leg press for better foot and lower leg engagement.
  2. Alternatively, squatting shoes help ankle mobility in the leg press.
  3. Don’t limit yourself to one stance – alternate foot placement throughout your program.
  4. You can have multiple leg press variations in one workout or program.
  5. You can use a spotter to go beyond failure with the leg press (advanced).
  6. Most importantly – avoid the mistakes below to prevent injury!

Leg Press Common Mistakes

Related: Should You Do Cardio On Leg Day?

The Ultimate Guide To Leg Press Foot Placement (11)

Lifting Heels

Leg press foot placement should be done in a way that allows you to keep the pressure in the heels throughout.

Lack of ankle mobility or lifting too much weight can result in the heels lifting off the plate.

This can lead to strain in the tendons and ligaments around the front of the knee, especially with heavy weights.

Pay particular attention to this with the low foot placement, as this is when the heels will want to lift if you don’t have the ankle mobility.

Rounding Lower Back

A very common mistake with the leg press is lowering the weight too far down so the hips and lower back round and lift from the back support.

This can be very dangerous to your lower back, especially with heavy weights on the machine.

Engage your core, glutes, and lower back to keep the back firmly pressed into the seat.

Also, only lower the plate down to a level where you can safely press it back to the starting position.

Keep an eye out for this mistake, particularly with the high foot placement variation.

Locking Out Knees

Finally, we have another commonly-seen mistake that beginners fall prey to on the leg press.

When the muscles get fatigued, we want to relieve the tension by locking out the knees – like we do when standing.

However, in the leg press, all the force of those heavy weights is pressing directly toward the knee joint.

It’s critical to keep the tension in the muscles – which is the point of the exercise anyway.

Avoid locking out the knees, only straightening the legs as far as possible without lock-out.

Alternatives to Leg Press

Related: Leg Press Alternative

If for some reason you are unable to add a leg press into your routine, there are many other options.

Other compound leg exercises that achieve a similar effect include the classic squat, with any of its many variations used to add resistance.

Alternatively, there are other compound leg machines, such as the hack squat, Smith machine squat, or V-squat machine.

Of course, there are also dozens of exercises that target the leg muscles in different combinations or in isolation.

Lunges, deadlifts, leg extensions, hamstring curls, or calf raises are just a few of the many options.

Frequently Asked Questions

How to do leg press?

See our step-by-step above for the correct technique to perform a leg press, in combination with the instructions for your preferred foot placement.

In brief, set up in the seat, place the feet on the plate, unlock the safety rack, inhale to lower the weight, and exhale to straighten the legs to the starting position.

Does foot placement matter on leg press?

While not the only important variable, foot placement does definitely affect the way the exercise hits your muscles.

Other elements include movement velocity, or time under tension, load or intensity, and overall volume.

Where do you place your feet on a leg press?

There are many positions you can have your feet in the leg press exercise.

The variations above all show that the best foot placement for you will depend on your training level, injury status, and the muscles you want to target.

Where should I put my feet in the leg press for quads?

All leg press variations will work the quadriceps to some extent.

That being said, lower foot placements create more knee flexion, which recruits the quads more to extend the knee.

Try a narrower, lower foot placement for an intense quad exercise – following the steps above, of course.

How high up should feet be on a leg press?

Placing your feet in the center of the plate is the best place to start for those new to the leg press.

As you become more experienced, you can experiment with higher foot placements that will further emphasize the glutes and hamstrings.

Higher foot placement will take some of the stress from your knees but will require more concentration to keep your back from rounding.

Final Thoughts

So, what did you think of our ultimate guide to leg press foot placement?

Let us know if you have the leg press in your program – and which stance you use – in the comments.

If you know anyone struggling with leg press technique, be sure to share this article to help them out.

As an expert and enthusiast, I don't have personal experiences or expertise, but I can provide information on the concepts mentioned in this article. Let's dive into the different concepts related to leg press foot placement.

Where do you place your feet on a leg press?

The best place to position your feet on a leg press machine plate depends on your build, health status, and training goals. Different foot positions emphasize different areas of your leg muscles, as well as the ankle, knee, and hip joints.

What does leg press foot placement mean?

Leg press foot placement refers to the positioning of your feet on the foot plate of a leg press machine. The placement of your feet can have a significant impact on the effects the exercise has on your muscles and joints. It can make the same weights feel easier, heavier, or even painful in cases where it is not optimal for an individual.

Which muscles are worked in the leg press?

The leg press is a compound, multi-joint lower body exercise that recruits many major muscle groups in the thighs, lower legs, and trunk. The major muscles involved in the leg press include:

  • Quadriceps: Rectus femoris, vastus lateralis, vastus medialis, vastus intermedius.
  • Hamstrings: Biceps femoris, semitendinosus, semimembranosus.
  • Glutes: Gluteus maximus, medius, minimus.
  • Adductors: Magnus, brevis, longus.
  • Calves: Gastrocnemius, soleus.
  • Core: Transverse abdominis, pelvic floor, diaphragm, quadratus lumborum.

For the purposes of foot placement, the focus is mainly on the quads, hamstrings, glutes, and to a lesser extent, the calves.

Leg Press Machine Types

There are different types of leg press machines commonly found in gyms:

  • Plate Loaded Machine: This is the commonly seen 45-degree leg press machine. It involves loading weight plates on either side and sitting in an inclined seat to press the plate up at a 45-degree angle.
  • Pin-Loaded Machine - Horizontal: This machine is pin-loaded, meaning the weight is set and controlled by a pulley system. Instead of sitting, the user lies back and pushes against shoulder pads. The backrest, rather than the foot plate, moves back and forth.
  • Pin-Loaded Machine - Seated: Similar to the pin-loaded machine above, but in an upright seated position. It provides a similar feel to the 45-degree leg press.

How to Use the Leg Press Machine

To use the leg press machine, follow these general steps:

  1. Sit in the seat with your back on the backrest.
  2. Place your feet flat on the plate.
  3. Push the platform away slightly (for a 45-degree machine) and turn the safety handles away.
  4. Hold the handles provided.
  5. Start from a straight leg position (but not locked out).
  6. Inhale and slowly lower the plate toward you until the hips and knees are at about 90 degrees.
  7. Exhale and drive through the heels to push the legs back to the starting position.
  8. Turn back the safety handles to set the plate before taking the feet off.

The technique may vary slightly depending on the specific leg press machine type.

The Three Directions of Leg Press

When it comes to leg press foot placement, there are three main directions to consider:

  1. Height: Placing your feet at the top, bottom, or anywhere in between on the plate affects the angles and forces during ankle, knee, and hip flexion and extension. It can also impact your lower back if you lack flexibility in the leg muscles.
  2. Width: The width of your stance, whether narrow, shoulder-width, or wide, changes the angle of the knee relative to the hips and affects the degree of knee flexion in the leg press.
  3. Angle: The toes can be aligned straight up on the plate or rotated out to varying degrees. Foot angle can change rotation in the hips and cause muscles to work slightly differently throughout the movement.

Different combinations of height, width, and angle can target specific muscle groups more effectively.

Leg Press Variations: The Most Common Foot Placements

Here are some common leg press foot placements:

  1. Regular Leg Press Foot Placement: Place the feet hip to shoulder-width apart, in the center of the plate. This works the general quads, glutes, hamstrings, and calves.
  2. Wide Stance Leg Press Foot Placement: Place the feet 1.5x shoulder-width or wider with toes slightly turned out. This emphasizes the adductors, glutes, and hamstrings.
  3. Narrow Stance Leg Press Foot Placement: Place the feet slightly narrower than hip-width apart, with toes turned out 45 degrees (optional). This targets the vastus lateralis (outer head of quads) and calves.
  4. High Leg Press Foot Placement: Place the feet hip to shoulder-width apart, higher towards the top of the plate. This emphasizes the glutes and hamstrings.
  5. Low Leg Press Foot Placement: Place the feet hip to shoulder-width apart, low toward the bottom of the plate, with the entire foot on the plate and heels in contact. This targets the quadriceps, especially the vastus medialis oblique (VMO) if toes are turned out.

These variations allow you to target specific muscle groups more effectively.

Leg Press Benefits and Pro Tips

The leg press offers several benefits:

  • Safer on the spine compared to free weight leg exercises.
  • Allows lifting heavier weights.
  • Works multiple major muscle groups in the legs and trunk.
  • Easy to adjust weight and progress.
  • Has built-in safety mechanisms.

Some pro tips for leg press exercises include trying barefoot leg press for better foot and lower leg engagement, using squatting shoes for improved ankle mobility, and alternating foot placements throughout your program to work different muscle groups.

Leg Press Common Mistakes

Avoid these common mistakes when performing leg press exercises:

  • Lifting Heels: Keep the pressure in your heels throughout the exercise to avoid strain in the tendons and ligaments around the front of the knee.
  • Rounding Lower Back: Avoid lowering the weight too far down, causing the hips and lower back to round and lift from the back support. Engage your core, glutes, and lower back to keep the back firmly pressed into the seat.
  • Locking Out Knees: Avoid locking out the knees and only straighten the legs as far as possible without lock-out. Locking out the knees can put excessive stress on the knee joint.

Alternatives to Leg Press

If you are unable to perform leg press exercises, there are alternative options. Other compound leg exercises like squats, lunges, deadlifts, hack squats, Smith machine squats, V-squat machine exercises, leg extensions, hamstring curls, and calf raises can target the leg muscles in different combinations or in isolation.

These exercises can achieve a similar effect to leg press exercises and provide alternatives for incorporating leg training into your routine.

These are the main concepts covered in this article. If you have any specific questions or need further clarification, feel free to ask!

The Ultimate Guide To Leg Press Foot Placement (2024)

References

Top Articles
Latest Posts
Article information

Author: Jerrold Considine

Last Updated:

Views: 5635

Rating: 4.8 / 5 (78 voted)

Reviews: 93% of readers found this page helpful

Author information

Name: Jerrold Considine

Birthday: 1993-11-03

Address: Suite 447 3463 Marybelle Circles, New Marlin, AL 20765

Phone: +5816749283868

Job: Sales Executive

Hobby: Air sports, Sand art, Electronics, LARPing, Baseball, Book restoration, Puzzles

Introduction: My name is Jerrold Considine, I am a combative, cheerful, encouraging, happy, enthusiastic, funny, kind person who loves writing and wants to share my knowledge and understanding with you.