You've chosen the Crest 3DWhitestrips Kit that is best for you, and now it's time to use it. Learn how to use your Crest 3DWhitestrips teeth whitening kit with LED Accelerator Light by following the four easy steps below. Soon, you'll be on your way to noticeably whiter teeth, 100% guaranteed. How often should you use Whitestrips? Since Crest 3DWhitestrips will whiten teeth for 6 to 12 months, we recommend using Whitestrips twice per year.
Recommended Products
Explore Crest Whitening Emulsions
Find the Crest 3DWhitestrips that work for you
Before You Start
Some things to note: You can brush your teeth gently immediately after using Whitestrips, but we don't recommend brushing your teeth immediately before applying them. Doing so may irritate your gums. We also suggest waiting a few days after a professional teeth cleaning to use Crest 3DWhitestrips in case your teeth or gums are sensitive. It's a good idea to check with your dentist before you start using Crest 3DWhitestrips, too. Let's get started!
Peel
Getting started is simple. First, gently remove the backing of the teeth whitening strip with your fingers. There are two strips – one designed for the top teeth and one designed for the bottom teeth. Use the longer strip for your top teeth and the shorter strip for your bottom teeth. You'll have to do this step with each strip separately, but for now let's work with one.
Apply
The next step is to apply the strip to your teeth (either the top or bottom row, depending on which strip you chose in the first step). To use them, simply remove the backing and apply the grippy side to your teeth. When initially applying the strip, slide the strip so that it is centered on the front teeth as much as possible. Then, fold the strip over to the back side of your teeth to secure it in place. Remember, make sure to use the whitening strip only on the teeth it is designated for – each strip has been specially designed to conform to either the top or bottom teeth. Repeat the peel and apply steps for the second strip. Leave strips on your teeth for the length indicated on your strip sachet (either 30 or 60 minutes).
Boost
Crest 3DWhitestrips Whitening Kits include The Crest LED Accelerator Light, which puts the same technology that dentists use to professionally whiten teeth right in the palm of your hand. The LED teeth whitening light is safe to use as directed and helps the ingredients in Crest 3DWhitestrips work more effectively by safely penetrating the enamel surface to weaken tough, yellow stains. Unlike other light products that use a broad light spectrum, our specific blue light wavelength was designed to target and neutralize yellow stains. The device was also created to deliver full light intensity across all your teeth for 30% better whitening compared to strips alone.
You'll use The Crest LED Accelerator Light during the last 5 minutes of the teeth whitening treatment. To start the light treatment, simply press and hold the two buttons on the sides of the device simultaneously to turn on the light, then release. Place the light against the strips on your teeth for 5 minutes. The light will automatically turn off after 5 minutes.
Reveal
When your time is up (either 30 or 60 minutes), peel off your strips and dispose of them in the trash. You may have some whitening gel leftover on your teeth, so gently brush that with a toothbrush.
Now, it's time to reveal your smile! With Crest 3DWhitestrips, you'll get noticeably whiter teeth, 100% guaranteed. So, start smiling and showing off your teeth today.
You May Also Like
Crest 3DWhitestrips Professional Effects Value Pack
$90 $45
Crest Whitening Emulsions with LED Accelerator Light
\\r\\n Some things to note: You can brush your teeth gently immediately after using\\r\\n Whitestrips, but we don't recommend brushing your teeth immediately before\\r\\n applying them. Doing so may irritate your gums. We also suggest waiting a few\\r\\n days after a professional teeth cleaning to use Crest 3DWhitestrips in case\\r\\n your teeth or gums are sensitive. It's a good idea to check with your dentist\\r\\n before you start using Crest 3DWhitestrips, too. Let's get started!\\r\\n
\\r\\n
\\r\\n
\\r\\n\\r\\n\\r\\n
\\r\\n
\\r\\n
Peel
\\r\\n
\\r\\n Getting started is simple. First, gently remove the backing of the teeth\\r\\n whitening strip with your fingers. There are two strips – one designed for\\r\\n the top teeth and one designed for the bottom teeth. Use the longer strip\\r\\n for your top teeth and the shorter strip for your bottom teeth. You'll\\r\\n have to do this step with each strip separately, but for now let's work\\r\\n with one.\\r\\n
\\r\\n
\\r\\n
\\r\\n
\\r\\n
\\r\\n
\\r\\n
Apply
\\r\\n
\\r\\n The next step is to apply the strip to your teeth (either the top or\\r\\n bottom row, depending on which strip you chose in the first step). To use\\r\\n them, simply remove the backing and apply the grippy side to your teeth.\\r\\n When initially applying the strip, slide the strip so that it is centered\\r\\n on the front teeth as much as possible. Then, fold the strip over to the\\r\\n back side of your teeth to secure it in place. Remember, make sure to use\\r\\n the whitening strip only on the teeth it is designated for – each strip\\r\\n has been specially designed to conform to either the top or bottom teeth.\\r\\n Repeat the peel and apply steps for the second strip. Leave strips on your\\r\\n teeth for the length indicated on your strip sachet (either 30 or 60\\r\\n minutes).\\r\\n
\\r\\n
\\r\\n
\\r\\n\\r\\n\\r\\n
\\r\\n
\\r\\n
\\r\\n
\\r\\n
\\r\\n\\r\\n\\r\\n
\\r\\n
\\r\\n
Boost
\\r\\n
\\r\\n Crest 3DWhitestrips Whitening Kits include The Crest LED Accelerator\\r\\n Light, which puts the same technology that dentists use to professionally\\r\\n whiten teeth right in the palm of your hand. The LED teeth whitening light\\r\\n is safe to use as directed and helps the ingredients in Crest\\r\\n 3DWhitestrips work more effectively by safely penetrating the enamel\\r\\n surface to weaken tough, yellow stains. Unlike other light products that\\r\\n use a broad light spectrum, our specific blue light wavelength was\\r\\n designed to target and neutralize yellow stains. The device was also\\r\\n created to deliver full light intensity across all your teeth for 30%\\r\\n better whitening compared to strips alone.\\r\\n
\\r\\n
\\r\\n You'll use The Crest LED Accelerator Light during the last 5 minutes of\\r\\n the teeth whitening treatment. To start the light treatment, simply press\\r\\n and hold the two buttons on the sides of the device simultaneously to turn\\r\\n on the light, then release. Place the light against the strips on your\\r\\n teeth for 5 minutes. The light will automatically turn off after 5\\r\\n minutes.\\r\\n
\\r\\n
\\r\\n
\\r\\n
\\r\\n
\\r\\n
\\r\\n
Reveal
\\r\\n
\\r\\n When your time is up (either 30 or 60 minutes), peel off your strips and\\r\\n dispose of them in the trash. You may have some whitening gel leftover on\\r\\n your teeth, so gently brush that with a toothbrush.\\r\\n
\\r\\n
\\r\\n Now, it's time to reveal your smile! With Crest 3DWhitestrips, you'll get\\r\\n noticeably whiter teeth, 100% guaranteed. So, start smiling and showing\\r\\n off your teeth today.\\r\\n
To start the light treatment, simply press and hold the two buttons on the sides of the device simultaneously to turn on the light, then release.Place the light against the strips on your teeth for 5 minutes. The light will automatically turn off after 5 minutes.
INSTRUCTIONS TO USE. USE DAILY WHITENING SERUM TWICE A DAY FOR 30 MINUTES PLUS 3 MINUTES WITH LED ACCELERATOR LIGHT. For full results use entire kit. Use up to three 18g Daily Whitening Serum kitsper year.
The LED device uses light energy to amplify the whitening power of the concentrated hydrogen peroxide film even further. This synergy between the formula and the device allows for whiter, brighter teeth in just 10 minutes a day*.
Secondly, it's important to maintain good oral hygiene by brushing and flossing regularly. Brushing before using the strips may help remove any plaque buildup on your teeth, while waiting for at least 30 minutes after using them before brushing again allows time for remineralization of tooth enamel.
As for whether you should brush your teeth after using whitening strips, there is no definitive answer. While some experts recommend brushing immediately after removing the strips to ensure all residue is removed, others advise waiting for 30 minutes to allow the enamel to rehydrate and minimize potential abrasion.
Brushing before applying Whitestrips can help remove surface stains and improve product adherence. Yet, it's equally essential to follow up with a gentle post-treatment brushing to eliminate residual gel and maintain oral hygiene. The ideal sequence can vary depending on personal preferences and product instructions.
While beverages and liquids such as milk and water are okay to drink, dark-colored beverages should be avoided after a teeth whitening procedure. Avoid beverages such as coffee, dark sodas, red wines, and tea. You should also avoid dark juices including cranberry, grape, orange, and tomato juice.
It's generally safe to use an LED teeth whitener once every 24-48 hours, depending on the strength of the device and the sensitivity of your teeth. The MOON Teeth Whitening Device is designed to be gentle and is safe to use twice a day for 14 days at a time.
To maximize the benefits, apply your preferred serum AFTER your LED light therapy session. The exposure to LED light prepares your skin by waking up and stimulating the cells, making them more receptive to the nourishing ingredients in serums as well as moisturizers.
How often teeth whitening treatments are recommended by dentists. Professional teeth whitening performed in the dentist's office is recommended once every year to every 18 months, depending on how long the results last. At-home kits can be used as often as once every four to six months.
The challenge with such instability, however, is that all whitening gels will begin degenerating immediately upon manufacture unless they are kept under constant refrigeration. If left at room temperature or exposed to warmer climates and hot shipping temperatures, the peroxide gel will lose potency.
An LED Accelerator Light is only needed for 3-minutes after the patient has worn the gel for 30-minutes. This material is safe enough to be used up to four times per day with virtually no sensitivity.
So to rectify the mistake, my partner and I tested two versions of Crest's wildly popular teeth whitening product, one with an LED light and one without. Spoiler alert: They both work extremely well.
Place the light against strips for 5 minutes. Light will turn off after 5 minutes. Then remove the light and strips. Peel strips from back of teeth first to ease removal.
Address: Suite 492 62479 Champlin Loop, South Catrice, MS 57271
Phone: +9663362133320
Job: District Sales Analyst
Hobby: Digital arts, Dance, Ghost hunting, Worldbuilding, Kayaking, Table tennis, 3D printing
Introduction: My name is Kieth Sipes, I am a zany, rich, courageous, powerful, faithful, jolly, excited person who loves writing and wants to share my knowledge and understanding with you.
We notice you're using an ad blocker
Without advertising income, we can't keep making this site awesome for you.